| 公開日期 | 標題 | 作者 |
| 1-五月-2004 | Adaptive backstepping motion control of induction motor drives | Lin, SK; Fang, CH; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-五月-2002 | Adaptive sliding-mode torque control of a PM synchronous motor | Fang, CH; Huang, CM; Lin, SK; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-二月-2002 | Analytical prediction of the cogging torque and torque constant of a hybrid stepping motor | Wang, SJ; Lin, SK; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-七月-2004 | Analytical prediction of the incremental inductance of the permanent magnet synchronous motors | Wang, SJ; Lin, SK; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-七月-2004 | Autoadjusting the photodetector in an optical head system for optimum focus | Wang, SJ; Lin, SK; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-十月-2005 | An automatic pin identification method for a three-phase DC brushless motor | Wang, SJ; Cheng, CC; Lin, SK; Ju, JJ; Huang, DR; 電控工程研究所; Institute of Electrical and Control Engineering |
| 15-四月-2006 | Design a linear motor absorber | Chang, CS; Liu, TS; Lin, SK; 機械工程學系; 電控工程研究所; Department of Mechanical Engineering; Institute of Electrical and Control Engineering |
| 1-十月-2005 | Design of a voice coil motor used in the focusing system of a digital video camera | Yu, HC; Lee, TY; Wang, SJ; Lai, ML; Ju, JJ; Huang, DR; Lin, SK; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-十二月-1999 | Efficient formulations for the manipulator inertia matrix in terms of minimal linear combinations of inertia parameters | Lin, SK; Fang, CJ; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-十一月-2004 | A flux estimation method for a permanent-magnet synchronous motor | Wang, SH; Fang, CH; Lin, SK; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-八月-1997 | Hybrid-damped resolved-acceleration control for manipulators | Wu, SL; Lin, SK; 交大名義發表; 電控工程研究所; National Chiao Tung University; Institute of Electrical and Control Engineering |
| 1-八月-1997 | Hybrid-damped resolved-acceleration control for manipulators | Wu, SL; Lin, SK; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-六月-1997 | Implementation of damped-rate resolved-acceleration robot control | Wu, SL; Lin, SK; 交大名義發表; 電控工程研究所; National Chiao Tung University; Institute of Electrical and Control Engineering |
| 15-四月-2006 | Low power consumption focusing actuator for a mini video camera | Yu, HC; Lee, TY; Lin, SK; Kuo, LT; Wang, SJ; Ju, JJ; Huang, DR; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-九月-1997 | Nonovershooting and monotone nondecreasing step responses of a third-order SISO linear system | Lin, SK; Fang, CJ; 交大名義發表; 電控工程研究所; National Chiao Tung University; Institute of Electrical and Control Engineering |
| 1-九月-1998 | On the stability of the hybrid-damped resolved-acceleration control | Lin, SK; Wu, SL; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-五月-2005 | On-line parameter estimator of an induction motor at standstill | Fang, CH; Lin, SK; Wang, SJ; 電控工程研究所; Institute of Electrical and Control Engineering |
| 2001 | A performance criterion for the depth estimation of a robot visual control system | Fang, CJ; Lin, SK; 電控工程研究所; Institute of Electrical and Control Engineering |
| 1-十月-2001 | A performance criterion for the depth estimation with application to robot visual servo control | Fang, CJ; Lin, SK; 電控工程研究所; Institute of Electrical and Control Engineering |
| 2001 | Sliding-mode direct torque control of an induction motor | Lin, SK; Fang, CH; 電控工程研究所; Institute of Electrical and Control Engineering |
