完整後設資料紀錄
DC 欄位語言
dc.contributor.authorYeh, Jen-Tauten_US
dc.contributor.authorLin, Shui-Chuanen_US
dc.contributor.authorTu, Cheng-Weien_US
dc.contributor.authorHsie, Kuo-Huangen_US
dc.contributor.authorChang, Feng-Chihen_US
dc.date.accessioned2014-12-08T15:11:14Z-
dc.date.available2014-12-08T15:11:14Z-
dc.date.issued2008-07-01en_US
dc.identifier.issn0022-2461en_US
dc.identifier.urihttp://dx.doi.org/10.1007/s10853-008-2711-1en_US
dc.identifier.urihttp://hdl.handle.net/11536/8620-
dc.description.abstractThe influence of draw ratios (DR) of gel-spun ultrahigh molecular weight polyethylene (UHMWPE) fibers on resultant morphologies, tensile, degrees of orientation, and crystal phase transition properties were investigated using wide-angle X-ray diffraction (WAXD), differential scanning calorimetry (DSC), and scanning electron microscopy (SEM). The anisotropic crystalline structure with full concentric circular rings originally shown on the WAXD patterns of the as-prepared and drawn UHMWPE fibers gradually transform into oriented fibers with azimuthal spots on the equator as their DR values increase from 1 to 20, in which their orthorhombic crystals, percentage crystallinity, crystalline orientation, and the birefringence values increase significantly. As evidenced by SEM and WAXD analysis, the chain-folded molecules originally present in kebab crystals of the as-prepared UHMWPE fiber specimens gradually transformed into shish-like crystals with relatively high orientation as their DR values increase from 1 to 20. In contrast, the crystallinity and crystal orientation values of the drawn UHMWPE specimens increase only slightly, as their DR values increase from 20 to 40, wherein both crystallinity values of orthorhombic and monoclinic crystals increase slightly. In fact, barely any oriented kebab but only shish crystals were observed on the surfaces of drawn UHMWPE fiber specimens with DR values higher than 20. The birefringence values increase only slightly with further increasing DR values, while crystallinity and crystal orientation values of the drawn UHMWPE fiber specimens remained relatively unchanged as their DR values increase from 40 to 150. In the meantime, the monoclinic crystals gradually grow at the expense of the orthorhombic form crystals as the DR values of drawn UHMWPE fiber specimens increase from 40 to 150. Possible reasons accounting for these interesting properties found for the drawn UHMWPE fibers with varying draw ratios are proposed in this study.en_US
dc.language.isoen_USen_US
dc.titleInvestigation of the drawing mechanism of UHMWPE fibersen_US
dc.typeArticleen_US
dc.identifier.doi10.1007/s10853-008-2711-1en_US
dc.identifier.journalJOURNAL OF MATERIALS SCIENCEen_US
dc.citation.volume43en_US
dc.citation.issue14en_US
dc.citation.spage4892en_US
dc.citation.epage4900en_US
dc.contributor.department應用化學系zh_TW
dc.contributor.departmentDepartment of Applied Chemistryen_US
dc.identifier.wosnumberWOS:000256928800029-
dc.citation.woscount15-
顯示於類別:期刊論文


文件中的檔案:

  1. 000256928800029.pdf

若為 zip 檔案,請下載檔案解壓縮後,用瀏覽器開啟資料夾中的 index.html 瀏覽全文。